Things You Need to Know About Pool Table Assembly

When it comes to pool table assembly there are some things that you need to know about. These tips can help you make the process go as smoothly as possible. Before you can begin, you need to have all of the necessary equipment in place. This includes the screws, a level and slates. Once you have all of these items, you can proceed with the installation of the pool table.

Disassemble the pool table

Disassembling the pool table is not a task to be taken lightly. It requires the proper tools and a lot of patience. If you do not have the skill to disassemble the table on your own, you should consider hiring professionals.

The first step in disassembling the pool table is to measure the doorways and hallways where you will be moving the pool table. This will ensure that you have the right amount of space.

Once you have measured and planned the route, you need to make sure you have the right equipment. For instance, you will need a power drill and a socket wrench. Also, you will need a staple remover. You should also wear safety goggles.

The next step is to remove the side rails. These are bolted to the frame of the pool table. They are very heavy and must be lifted gently. Pulling the rails too hard can cause the surrounding felt to get damaged.

Remove the slates

When you remove the slates from a pool table assembly, you will need the right tools. This can be a lengthy process. Before you begin, make sure that you have a safe place to work and eye protection.

You will also need a power drill and a staple gun. These items will help you to get access to the felt and the rails. If you have any problems, call a professional.

First, you will need to determine the location of the slates on the table. The central slab is a good place to start. You should mark each piece so that you can reinstall them in the same position.

Slates are very heavy. They weigh in the hundreds of pounds, and can be easily damaged. Make sure that you have enough manpower to assist you when you take them apart.

It is best to take the slates apart in sections, so that you can get the whole thing back together without damaging the table. Once you have reattached each section, you will want to use movers’ wrap to secure it.

Install the pool table

It’s not a simple task to install a pool table. However, if you know the basic steps, it can be done.

Before installing the pool table, you need to make sure the space you have for the table is adequate. The length and width of the fixture also need to be taken into account. This will affect the height of the table.

When deciding on a fixture, choose a bulb that will provide the proper amount of light for your room. Depending on the size of your room, you may need to add an extra light or two. Using a fluorescent bulb is generally considered the best option for most players.

If you have a basement floor or wooden floor, they are more durable than higher stories. You might want to consider installing a light in the ceiling to illuminate the game room.

A professional will have all the necessary tools and experience to do the job. But, if you don’t know much about carpentry or pool tables, it’s a good idea to leave this task to the pros.

Level the pool table

If you have a pool table, you may want to level it. Some tables have adjustable legs. Others have metal plates. This will prevent you from having to buy new hardware. You can level your table yourself if you know the right tools and method.

First, you’ll need to determine the size of the table. Then, you’ll need to mark the areas where the leveling screws should be placed. After that, you’ll need a screwdriver, a carpenter’s level, and shims. It’s a good idea to use a pencil and a straight edge, as well.

When you’re measuring, be sure to measure the entire perimeter of the table. You can also measure the corners. Make sure that the leveler screws are flush with the surface of the table.

Before starting to level your pool table, you’ll need a carpenter’s level. This will help you to determine the level and tilt of the pool table.